Notifier NFS-320

The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX Series of Fire Alarm Controls from NOTIFIER. In stand-alone or network configurations, ONYX Series products meet virtually every application requirement. The NFS-320’s modular design makes system planning easier. The panel can be configured with just a few devices for small building applications, or networked with many devices to protect a large campus or a high-rise office block. Simply add additional peripheral equipment to suit the application. Wireless fire protection can be added with the SWIFT wireless gateway and devices.

request information »

Product Features
Initiating Devices
Intelligent Modules

NFS-320 Product Data
One isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7
Up to 159 detectors and 159 modules per SLC; 318 devices maximum
- Detectors can be any mix of ion, photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG.
- Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG.
Optional FWSG Wireless SWIFT Gateway supports wireless SLC devices
Standard 80-character display
Network options:
- High-speed network for up to 200 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYX-Works, NFS-3030, NFS-640, and NCA).
- Standard network for up to 103 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYX-Works, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/400, AFP-1010, and AM2020). Up to 54 nodes when DVC-EM is used in network paging.
6.0 A power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization
Built-in Alarm, Trouble, Security, and Supervisory relays
VeriFire Tools online or offline programming utility. Upload/Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware
Auto programming and Walk Test reports
Multiple central station communication options:
- Standard UDACT
- Internet
- Internet/GSM
80-character remote annunciators (up to 32)
EIA-485 annunciators, including custom graphics
Printer interface (80-column and 40-column printers)
History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file
Alarm Verification selection per point, with automatic counter
Pre signal/Positive Alarm Sequence (PAS)
Silence inhibit and Auto Silence timer options
NAC coding functions:
- March time
- Temporal
- California two-stage coding
- Canadian two-stage
- Strobe synchronization
Field-programmable on panel or on PC with VeriFire Tools program check, compare, simulate
Full QWERTY keypad
Battery charger supports 18 – 200 AH batteries
Non-alarm points for lower priority functions
Remote ACK/Signal Silence/System Reset/Drill via monitor modules
Automatic time control functions, with holiday exceptions
Extensive, built-in transient protection
Powerful Boolean logic equations
Approvals:
- UL 864 (Fire)
- UL 1076 (Burglary)
- UL 2572 (Mass Notification Systems)
- ULC-S527-11 Standard for the installation of Fire Alarm Systems
- UL/ULC: S635
- FM approved
- CSFM: 7165-0028:0243
- MEA: 128-07-E
- ULC Listed: S527-11
- US Coast Guard: 161.002/50/0, 161.002/55/0 (Standard 46 CFR and 161.002)