Notifier NFS2-640

The NFS2-640 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER. In stand-alone or network configurations, ONYX Series products meet virtually every application requirement. The NFS2-640’s modular design makes system planning easier. The panel can be configured with just a few devices for small building applications, or networked with many devices to protect a large campus or a high-rise office block. Simply add additional peripheral equipment to suit the application. A host of other options are available, including single or multi-channel voice; firefighter’s telephone; LED, LCD, or PC-based graphic annunciators; networking; advanced detection products for challenging environments; wireless fire protection; and many additional options.

request information »

Product Features
Initiating Devices
Intelligent Modules

NFS2-640 Product Data
One, expandable to two, isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7
Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology
Up to 159 detectors and 159 modules per SLC; 318 devices per loop/636 per FACP or network node
Detectors can be any mix of ion, photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG
Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG
Standard 80-character display, 640-character large display(NCA-2), or display-less (a node on a network)
Network options:
- High-speed network for up to 200 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYX-Works, NFS-3030, NFS-640, and NCA)
- Standard network for up to 103 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCA-2, DVC-EM, ONYX-Works, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/400, AFP-1010, and AM2020). Up to 54 nodes when DVC-EM is used in network paging
6.0 A switch mode power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization
Built-in Alarm, Trouble, Security, and Supervisory relays
VeriFire® Tools online or offline programming utility. Upload/Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware
Auto-programming and Walk Test reports
Multiple central station communication options:
- Standard UDACT
- Internet
- Internet/GSM
80-character remote annunciators (up to 32)
EIA-485 annunciators, including custom graphics
Printer interface (80-column and 40-column printers)
History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file
Alarm Verification selection per point, with automatic counter
Pre-signal/Positive Alarm Sequence (PAS)
Silence inhibit and Auto Silence timer options
March time/temporal/California two-stage coding/strobe synchronization
Field-programmable on panel or on PC, with VeriFire Tools pro-gram check, compare, simulate
Full QWERTY keypad
Battery charger supports 18 – 200 AH batteries
Non-alarm points for lower priority functions
Remote ACK/Signal Silence/System Reset/Drill via monitor modules
Automatic time control functions, with holiday exceptions
Surface Mount Technology (SMT) electronics
Extensive, built-in transient protection
Powerful Boolean logic equations
Support for SCS Series smoke control system in HVAC mode.
Approvals:
- Certified for seismic applications when used with the appropriate seismic mounting kit
- Approved for Marine applications when used with listed compatible equipment
- UL/ULC Listed: S635
- ULC Listed: S527-11
- FM Approved
- MEA: 128-07-E
- Fire Dept. of New York: #6212
- CSFM: 7165-0028:0243
- City of Chicago
- City and County of Denver
- CCCF listed